|
|
Kinetics of Heterogeneous Processes in Silicate Technologies -Dehydroxylation and Disolution of Clay Minerals
Křečková, Magdaléna ; Kutzendörfer, Jaroslav (referee) ; Kuřitka, Ivo (referee) ; Havlica, Jaromír (advisor)
The first part of the thesis discuss general characterization of heterogeneous processes in silicates. This part is focused on kinetics of heterogeneous processes and mathematical description of reactions time behavior. The other part describes important technologies in silicate industry such as sintering, solid matter decomposition, transition modification, etc. Another chapter deals mineralogy, structure and properties of eminent silicate raw materials. Emphases is given to characterization of clay minerals and their utilising. The experimental part handle the analytic techniques used for investigation of thermal decompostion, dehydroxylation, crystalization of Al-Si spinel phase and sintering process of washed kaolin Sedlec Ia from the region Carlsbad (Czech Republic). Concluding chapter reports on results of experimental work.
|
|
|
Possibilities of clay plasters shrinkage elimination
Melichar, Jindřich ; Koplík, Jan (referee) ; Opravil, Tomáš (advisor)
Earth plasters which are applicated in interiers don´t have just an estetic, but mainly heat storage function. To accomplish better storage properties the plaster has to be laid on the wall in sufficient thick ply. But this use to be accompained by creating of cracks during dehydration of the plaster. This bachelor work will be considering possibilities of elliminating this negative event by additing suitable components to suppress shrinkage and cracks by creating ettringite.
|
|
|
The problems of fenol sorption from waste water
Židek, Michal ; Pavlovský,, Jiří (referee) ; Doležalová Weissmannová, Helena (advisor)
The bachelor work deals of sorption of phenol from waste water. In theoretical part the basic characteristic of phenol, their effects and presence in environmental compounds are described. The possibility of removal phenol from waste water in waste water treatment is also described. The adsorption process of removal phenol introduced too. The analysis current adsorbents using in removal phenol from aqueous solutions and characteristic properties are also presented in relation to materials on the base of clay minerals. The experimental part is focused on the possibility of removal phenol from aqueous solution via adsorption mechanism under various pH conditions.
|
|
|
The optimalization of clay building components
Melichar, Jindřich ; Šiler, Pavel (referee) ; Opravil, Tomáš (advisor)
Clay building components are nowadays one of the most used building materials in the world. Except easy availability and processability clay building components have also heat storage function. This master´s thesis will be considering possibilities of improving thermal and mechanic properties of these materils by additing suitable reinforcements.
|
|
| |
|
|
Clay minerals in polymeric materials
Zaťko, Petr ; Sluková, Michaela (referee) ; Krmíček, Lukáš (advisor)
The bachelor thesis deals with the clay minerals as fillers in polymer materials and their polymer/clay nanocomposites. The thesis brings an introduction to the structure of polymers and clay minerals and their application in polymer materials. The practical part of the thesis deals with testing the diffusivity of CO2 through the film made of recycled polyvinyl butyral with fillers Nanofil®5, Dellite® 67 and Cloisite® 93A and their comparison with reference samples from recycled PVB without added fillers and commercial films of extruded PVB.
|
|
|
Influence of the mineralogical composition of raw material on phases formed during the burning of hydraulic lime and natural cement
Kozlovcev, Petr ; Přikryl, Richard (advisor) ; Hladil, Jindřich (referee) ; Škvára, František (referee)
Natural hydraulic lime and natural cement have been used in the building industry for centuries. These inorganic hydraulic binders are called "traditional" or "alternative" because they can, in some cases, substitute modern Portland cement. The recent increased interest in these binders is due not only to their use in restoration practices, but also because their production and use is less energetically demanding than in modern cements. Historically, many types of hydraulic binders were produced in the regions of Bohemia and Moravia. However, much information has been lost about their manufacturing process, which raw materials were used, and we are uncertain of the exact character and properties of the burned material. To date, studies have only addressed the impact of the chemical composition of raw material on the parameters of the burned material - all this is well known for Portland cement, much less for other types of hydraulic binders. The aim of this dissertation was to study the various types of raw materials (limestone containing non- carbon admixtures) and to understand the characteristics of their respective hydraulic lime and natural cement. This was done by analyzing the impact of conditions (highest achieved burning temperature and time of burning) and the mineral and chemical...
|
|
|
Adsorption of pharmaceuticals from aqueous solutions onto clay minerals
Vallová, S. ; Sokolová, B. ; Valovičová, Věra ; Plevová, Eva
The objective of this work was to investigate to possibility of clay minerals for the removal of drugs from aqueous solutions. Natural minerals such as montmorillonite, vermiculite, kaolinite and modified montmorillonites KSF and K10 (intercalated by Fe3+) were used as potential sorbents for three analgetics: paracetamol, ibuprofen and diclofenac from aqueous solutions. This research demonstrated that adsorption of all three pharmaceuticals onto natural untreated clay minerals, except paracetamol sorption on Na-MMT, is negligible. On the other hand, the chemically modified montmorillonites demonstrated significant sorption ability in the order diclofenac>ibuprofen>paracetamol.
|
|
|
Influence of the mineralogical composition of raw material on phases formed during the burning of hydraulic lime and natural cement
Kozlovcev, Petr ; Přikryl, Richard (advisor) ; Hladil, Jindřich (referee) ; Škvára, František (referee)
Natural hydraulic lime and natural cement have been used in the building industry for centuries. These inorganic hydraulic binders are called "traditional" or "alternative" because they can, in some cases, substitute modern Portland cement. The recent increased interest in these binders is due not only to their use in restoration practices, but also because their production and use is less energetically demanding than in modern cements. Historically, many types of hydraulic binders were produced in the regions of Bohemia and Moravia. However, much information has been lost about their manufacturing process, which raw materials were used, and we are uncertain of the exact character and properties of the burned material. To date, studies have only addressed the impact of the chemical composition of raw material on the parameters of the burned material - all this is well known for Portland cement, much less for other types of hydraulic binders. The aim of this dissertation was to study the various types of raw materials (limestone containing non- carbon admixtures) and to understand the characteristics of their respective hydraulic lime and natural cement. This was done by analyzing the impact of conditions (highest achieved burning temperature and time of burning) and the mineral and chemical...
|
|
|
Paleoenvironmental record of carboniferous lacustrine deposits of central and western Bohemian basins: analysis and korealiton of mineral and biogenic proxies
Lojka, Richard ; Hradil, David (advisor) ; Hladil, Jindřich (referee) ; Janočko, Juraj (referee)
Ph.D. thesis represents summary of multidiciplinary palaeoenvironmental and palaeoclimatic research of the most significant Late Pennsylvanian lacustrine horizon of the central and western Bohemian basins - the Malesice Member of the Slaný Formation. Two cores from new shallow drills, situated 80 km apart, were analysed. Multidisciplinary approach is based on description of lamination structure and periodicity; mineral and isotopic composition of autigennic carbonates, namely siderite; compositiona of detrital minerals including clay mineral assemblages; and composition of autochthonous and allochthonous organic particles including palynospectra. Detailed analysis of drill cores lead to the identification of individual phases of lake development linked with lake-level fluctuation and water-column stratification, which were driven by a sume of precipitation and its seasonal distribution. Changes in precipitation also affected compostion and density of vegetational cover in the lake surroundings, weathering intesity of source rocks and degradation of organic matter in the drainage basin, and so precipitation affected final grain-size and composition of detrital material deposited in the lake. Beside common environmental signatures at both studied sites, there are also significant...
|
guest ::
